Asset Inspection – Past Projects and Portfolio

NQ UAV has completed a large number of interesting and unique projects across a wide cross section of industries. Below is a random selection of projects that we have successfully completed over the last few years, if you are interested in having us perform a similar operation or would like to know more information about any of the particular operations, get in contact with us.

A ship loader inspection show a ship loader in an up position, it is always odd to see board walks and railings in the wrong orientation against a backdrop of a gorgeous ocean

Ship Loader Inspection

November 2015 – Ship Loader Inspection NQ UAV were called in at very short notice to perform an emergency asset inspection on a ship loader. The site managers and engineers were able to observe the entire operation from an additional monitor and communicate clearly with the payload specialist and pilot to ensure that they could see […]

Rail Bridge Inspection

February 2016 – Rail Bridge Inspection During a recent flood event, a rail bridge in the Burdekin area was damaged by the high volumes of water and debris travelling down stream. NQ UAV went to investigate the bridge to demonstrate the abilities of an RPAS to conduct a rapid asset inspection of infrastructure after a […]

Looking down to show plant equipment in the area surrounding the chimney

Chimney Inspection

Chimney Inspection What is the best way to minimise a disruption to your plant facility during a shutdown or just do a chimney inspection? Get NQ UAV in to do an asset inspection via a drone. We are able to get in and out in an extremely short period of time ensuring that the other […]

Captured on our Aerial Photography Platform on Mt Louisa, Townsville

TEi – Mt Louisa Reservoir Project

August 2014 – September 2015 Townsville Engineering industries approached us to provide frequent Photography and Videography updates of the Mt Louisa Water Tank Project. The purpose was two fold, to showcase the fantastic work that TEi has been conducting on Mt Louisa as well as to provide project updates to Townsville Water and Townsville City Council. This […]

An angry crow moments before attacking the crew

Townsville City Council – Birds Nest Inspection

August 2015 – Birds Nest Inspection How do you determine the species of bird that built a nest when a cheeky and aggressive crow has taken over? You get NQ UAV to conduct a birds nest inspection. Before removal of a birds nest from key infrastructure; the Townsville City Council needs to determine the species of bird that […]

An Asset Inspeciton carried out at QNI with our Aerial Photography and Asset Inspection platforms.

Queensland Nickel – Stack Inspection

Queensland Nickel – Stack Inspection What do you do when you have a condemned structure that requires an urgent inspection? You call in NQ UAV to conduct a detailed inspection over the entire structure. Our skilled pilots are able to operate within meters of the structure while our payload specialists control the camera to get […]

A side profile of the land slip shows the slip is starting to undercut the dirt road

AECOM – Mareeba Shire Council – Land Slip

July 2015 – Land Slip We were approached by AECOM – Cairns to conduct a series of high risk flights to capture 3D data of a land slip on a dirt road in the wet tropics. AECOM had assessed the site and deemed that no other method apart form using a UAV platform was safe or […]

LiDAR Sample Data Set

Hovermap LiDAR System

November 2016 – Hovermap LiDAR System NQ UAV recently completed a series of trials with the Hovermap LiDAR system, the system is a LiDAR based system that uses SLAM (Simultaneous Localisation and Mapping) to generate a very accurate and detailed 3D point cloud of the environment that we operate over or inside of. Hovermap is an impressive […]

Asset Inspections

Archives